Emergency Mode

This tab enables you to enable and set up an emergency mode.

• Tip: To limit the display of information in the grid and maximize performance, use the filter. You can sort on site ID, ICU number, and ICU type.

Detail View Header

The fields in the top section of this tab define the data that displays.

Site ID

Identifier of the tank site currently selected in the grid or that you are defining. This field is required. Must be a valid fueling site location. This field has a list box. The site description displays to the right of the ID. Site IDs are defined on the Data -> Fuel/Fluid Tanks -> Setup -> Fueling Sites screen.

ICU number

Identifier of the island control unit (ICU). This field is required. Must be 1 or higher. The site ID and ICU number combination must be unique.

Prompt ICU to ask for setup parameters

Click the Prompt ICU to ask for setup parameters button to obtain setup parameters from the ICU.

Detail View

The screen group in the bottom section of the tab enables you to record information about the pump, such as ID, channel, pulse ratio, pump group, and whether it accepts credit card transactions. All fields are optional.

Emergency mode enabled

Check this box to enable emergency mode.

Send emergency mode notification message

Check this box to send an emergency mode notification message.

Emergency mode not authorized

Create your emergency mode not authorized message in this field. Your message must be 30 characters or less. Use the following characters to change how your message displays:

• Use a caret (^) if you want to create two separate message. This splits the message.

• Enter a pipe character (|) if you want to force a line break in your message. Use this, for instance, if you don't want a sentence to wrap on the ICU in an odd spot. Enter the pipe character to force a line break in the spot you want instead.

Emergency classes allowed to obtain fuel while emergency mode is enabled Screen Group Data Table

Delete

If this field has a check, the entire row is deleted when you click Save.

Emergency class ID

The identifier of the emergency class.

Description

The description of the emergency class used for the emergency mode.