Inspection Points |
Note: Non-linear assets do not display on this screen. Use the Data -> Equipment Units -> Fleet Equipment screen.
If a linear asset uses a preventive maintenance (PM) program, use the Inspection Points tab to specify the from and to markers that delineate the sections from each other. For example, if a linear asset included both Class I and Class II track types, you could define separate inspection points that break where the track type changes.
You can also separate linear-asset sections by maintenance territory so that you can schedule and track the inspection and work order history by assigned territory.
Tip: To limit the display of information in the grid and maximize performance, use the filter. You can sort on equipment ID, model information, class information, segment ID, to/from marker ID, and to/from offset, among other values. The list of searchable fields on the filter is extensive; use the scroll bar to view them all. If you specify a range, any record that crosses any part of that range will be displayed.
The Primary Information screen supports location-level access control, so you must belong to a user group with the applicable authorizations to make changes or updates.
The field in the top section of this tab defaults from the information entered on the Basic Info tab. The field is read only.
Equipment ID
Identifier of the equipment unit currently selected in the grid. This field has a list box. The equipment unit year, manufacturer, and model display to the right of the ID.
Tip: You can set a zoom button for this field to detect the type of equipment and display the appropriate screen. If you used Administrator Mode to add a zoom button, you will need to use it again to remove your user-defined zoom button for this functionality to work.
Asset type
The type of asset.
The data in the fields in the bottom section of this tab, presented in a screen group, define the inspection points. Unless otherwise indicated, these fields are optional.
Delete
To delete the entries in the fields to the right, place a check in this field and click Save.
PM service
PM service code (task ID) associated with the PM service. This field has a list box.
From marker ID
Identifier of the marker at which the asset begins. This field has a list box, which is limited to markers found on the segment specified on the Offsets tab.
From segment ID
Identifier of the segment at which the marker begins. This field has a list box, which is limited to segments assigned to the marker ID.
From x offset
The offset from the segment. The offset must be less than or equal to the segment length.
To marker ID
Identifier of the marker at which the asset ends. This field has a list box, which is limited to markers found on the segment specified on the Offsets tab.
To segment ID
Identifier of the segment at which the marker ends. This field has a list box, which is limited to segments assigned to the marker ID.
To x offset
The offset from the segment. The offset must be less than or equal to the segment length.