How to add a zoom button

Note: To add a zoom button, you must be assigned to a user group that has a check in the System administrator rights field on the Special Rights tab of System Mgmt -> Setup -> Access Rights -> User Groups screen.

To add a zoom button:

Step 1. Access the FASuite screen on which you want to add a zoom button.

Step 2. To activate Administrator mode, click the Modify UI Information button .

Step 3. Right-click any control (field) on the screen (or its label).

A shortcut menu appears.

Step 4. Select Modify UI.

The Control Detail dialog box appears.

Step 5. Place a check in the Add/Modify Zoom Button field.

Step 6. Click OK.

The Zoom Button Detail screen appears.

Step 7. To activate the button, place a check in the Enable button field.

Note: To learn how to access the information required in steps 8–10, go to How to display a field's properties.

Step 8. In the Target Screen Id field, type the identifier of the screen that should display when the zoom button is clicked.

Step 9. In the Target Window Id field, type the identifier of the window that should display when the zoom button is clicked.

Step 10. In the Target Control Id field, type the identifier of the control that should display when the zoom button is clicked.

Step 11. Click OK.

Step 12. To exit Administrator mode, click the Stop button .